Buy S1E Products

Quadex

The Quadex™ Repair Materials Division designs, formulates and manufactures high performance polymeric materials and coatings for the water, wastewater and industrial marketplace.
Grid List
  • Structure Guard

    Quadex Structure Guard- FM - (6) 600x300mm cartridges

    $390.00

    Quadex Structure Guard - FM
    Structure Guard®-FM is a 100% solids epoxy mastic used to protect new infrastructure and to rehabilitate existing, damaged, infrastructure

    • 600x300mm Cartridge (1/4 gallon)
    • 3 sq. ft. of coverage at 125 miles (1/8")
    • Fiber reinforced epoxy mastic
    • Designed for additional structural integrityand extended working time
    • Can be built to 250 mils (1/4")
    • Compression strength is 9,650 PSI.
    • Designed for steel and masonry structures: manholes, wet walls, vaults, septic tanks
    • Steel substrates
    • Floor and wall penetrations/cracks
    • Extreme bonding to nearly all substrates
    • Simple spot repair
    • Trowel applied
  • Quadex Structure Guard- FM 1.5 Gal. (1 Gal. x ½ Gal.) Kit

    Quadex Structure Guard- FM 1.5 Gal. (1 Gal. x ½ Gal.) Kit

    $130.00

    Quadex Structure Guard - FM
    Structure Guard®-FM is a 100% solids epoxy mastic used to protect new infrastructure and to rehabilitate existing, damaged, infrastructure

    • 1.5 Gal. Kit
    • For steel and masonry structures
    • Designed for additional structural integrity and extended working time
    • Can be built to 250 mils (1/4") Compression strength is 9,650 PSI
    • 18 sq. ft. of coverage at 125 mils (1/8")
    • Manholes, wet wells, vaults and septic tanks
    • Steel substrates
    • Floor and wall penetrations/cracks
    • Extreme bonding to nearly all substrates
    • Simple spot repair
    • Trowel applied
  • Quadex Structure Guard - RS - (6) Cartridge Cases (600mm x 300mm)

    Quadex Structure Guard - RS - (6) Cartridge Cases (600mm x 300mm)

    $390.00

    Quadex Structure Guard - RS
    Corrosion Resistant Epoxy Protective Coating

    • (6) 600mm x 300mm cartridges (1/4 gallon)
    • Designed for masonry structures
    • Uses OneGun
    • Rapid setting epoxy mastic
    • Designed for quick return to service/inverts
    • Return to service in 1.5 hours 
    • Fully cured in 2 hours at 70 degrees
    • 3 sq. ft. of coverage at 125 mils (1/8") per cartridge
    • 100% Solids, No VOCs
    • Fast set time
    • Contains no calcium chloride
    • Excellent corrosion and abrasion resistance
    • Trowel Applied
  • QuadPlug

    Quadex™ Quad Plug (50 lb. pail)

    $35.65

    Quadex Quad Plug
    Quad-Plug™ is a blend of special cements and admixtures which are designed to instantly stop running water or seepage in all types of concrete and masonry structures.

    • 50 lb. pail covers 51 cubic ft.
    • 12 sq. ft. of coverage at 500 mils (1/2")
    • No calcium chloride, making product H2S resistant
    • Hybrid fast acting hydraulic cement
    • Compression strength is 1,500 PSI after 30 minutes
    • Non-shrink, expands as it sets
    • No mixing
    • Powder is applied directly to leak
    • Stops running water immediately
    • Non-metallic
    • Sulfate resistant
    • With a rubber gloved hand, place a generous amount of dry Quad-Plug and apply with a smooth, fast motion over the active leak.
  • Quadex™ I&I Guard - (6) 300x300m applicator cartridges

    Quadex™ I&I Guard - (6) 300x300m applicator cartridges

    $390.00
    Quadex I&I Guard
    Quadex™ I&I Guard™ is a quick response dual component hydrophobic polyurethane with a 1 – 3 second reaction time. It is designed to stop rapid water flow (>50 GPM) leaking from concrete or other underground structures.
    300x300mm Cartridge
  • hyperform

    Quadex™ Hyperform (60 lb. bag)

    $35.65

    Quadex Hyperform
    Quadex Hyperform™ is a one component, rapid setting, high early strength patching material designed for repairing vertical and horizontal concrete and masonry structures. With invert lining, flow can be released with 25-30 minutes post mixing.

    • 60 lb. bag
    • 60 lb. bag covers 48 cubic ft.
    • 11.5 sq. ft of coverage at 500 mils (1/2")
    • Hybrid fast curing hydraulic cement
    • Designed for building benches, inverts, and filling voids.
    • Mixed with water before applying
    • Compression strength of 2,500 PSI at 1 hour and fully cured after 28 days with compression strength of 7,000 PSI
    • Can be returned to service after 1/2 hour
    • Out gassed in one hour and can be epoxy coated
    • Rapid Setting
    • High early and ultimate strengths
    • Non-shrinking
    • No calcium chloride
    • Excellent resistance to freeze & thaw
    • Trowel apply
  • Quadex™ Flex Guard - FM - (6) 600mm cartridges

    Quadex™ Flex Guard - FM - (6) 600mm cartridges

    $450.00

    Quadex Flex Guard - FM <(6) 600mm cartridges
    Flex Guard™ Epoxy is a 100% solids, hybrid epoxy coating that provides both strength and chemical resistance while delivering 11-150% elongation for extreme environments.

    • Includes (6) 600mm x 600mm cartridges (1/3 gallon)
    • Flexible fiber reinforced epoxy mastic
    • Compression strength of 5,000 PSI
    • 4 sq. ft. of coverage at 125 mils (1/8)" per cartridge 
    • Uses OneGun
    • Can be applied to metal and concrete
    • 100% solids, no VOCS
    • Quick drying
    • Can be applied in areas of high humidity 
    • Unaffected by freeze and thaw
    • Applied with putty knife or trowel
  • Chimney

    Quadex™ Chimney Guard - 2 Bucket Kit

    $185.00

    Quadex Chimney Guard - Flexible Manhole Cimney Coating

    • Two Component Kit
    • Pre-measure Kit (Price is per kit) 
    • 270% elongation
    • Self Priming
    • One kit designed for 2 ft x 2 ft structure at 100 mils 91/10"
    • Applied with trowel
    • Designed for steel and masonry structures
    • High cuild monolithic coating / 100 mils per coat
    • One step, durable chimney seal
    • Superior adhesion to steel, concrete and brick
    • Permanent flexibility at how temperature
    • Extended work time
  • Quadex™ OneGun™

    Quadex™ OneGun™

    $750.00

    Quadex™ OneGun™

    • One delivery method, multiple repair materials
    • Dual component delivery system
    • Battery operated with Volt Lithium-Ion rechargeable battery
    • 3 hours continuous work time
    • Batter operation eliminates cords and hoses from the work area
    • Resealable cartridges eliminate material waste
    • Durable design to exist in the toughest of environments
    • 1 to 1 or 2 to 1 ratios


Grid List