Leak Sealing System
for Brick and Cement Structures
SealGuard II
SealGuard II is a dual component hydrophobic polyurethane water stop system designed to stop high infiltration in precast or brick lined structures. SealGuardII is highly reactive (1-3 seconds) and can stop leaks in cessation of high (3,000 GPM+) SealGuardII is pumped under pressure with a caulking gun and can be injected into flowing water.
Example of Brick Application
Example of Barrel Joint Application
How to Use
Slide (Nut) B over (Mixer) A thread end first
Drill 5/8” diameter hole to intersect leak path
Tap A+B into hole until snug
Prepare gun by pulling back plungers on E (dual caulk gun) insert D (tubes) while holding vertical, remove C from threaded end of tubes
Quickly align threads on D (tubes) with B (nut) and tighten to secure
Pump gun vigorousl to expel grout to refusal or seal. If grout is washing out either pump slower or stop pumping and watch grout until it reacts halfway down A (mixer) then quickly give a pump to expel and repeat.
